Follow these instructions to take a client supplied mold tape lift sample.
A client-supplied mold sample is much cheaper that an onsite visit; but there are drawbacks.
A client-supplied mold sample will not tell the source of the water intrusion that is causing the mold growth. Most of all you won’t know the extent of the mold spore contamination of your contents. If you don’t fix the water leaks or sources of water, there is a high degree of probability that the mold will return.
If you are considering litigation, this should be a first step to determine if you have an issue.
You should not use the client supplied mold sample in a court case because you can’t prove that the sample you took was from the mold that is the source of your complaints. It’s called a Chain of Custody. Your attorney can advise your further.
A tape lift sample will tell you if you have mold growth in the discoloration where you took the sample.
To take a successful mold tape lift sample, carefully follow these directions.
- Turn a zip‐lock sandwich bag inside out.
- Tear off a piece of clear (not frosted) scotch tape approximately the length of your pinky finger.
- Fold a tab on the strip of tape to enable pulling the tape off sampled surface.
- Take the piece of tape and press lightly against the discoloration to cover as much of the tape as possible. Be sure you can see through the probable mold on the tape. If not, take another sample. Press LIGHTLY.
- Place the tape as flat as possible onto the inside‐out zip‐lock sandwich bag.
- Fold the zip‐lock baggie right‐side‐out and seal the grooved top.
- Label the zip‐lock baggie with a Sharpie indicating both the date and the location of the sample.
- If possible, also photograph the area of the sample and submit it with your sample.
- The total price for 1 sample and report is $125. Any additional samples cost $75 each.
- Please sign the Client Supplied Mold Tape Lift Sample Agreement and enclose with payment, a photo if possible of where you took the sample.
Send the samples to
American Air Testing
PO Box 12479
San Francisco, CA 94112
Results should be received three business days after receipt of the sample. Please call or email and let us know when the sample has been mailed or delivered. Your results will be emailed to you.